Pile-Driving Formulas for Friction Piles in Sand
Dynamic pile-driving formulas are widely used in predicting the load-carrying capacity of friction piles and in writing pile-driving specifications. Further, when load tests are available,...

Axial Capacity of Steel Pipe Piles in Clay
Development of theories for the prediction of the axial compressive and tensile load capacities of driven piles is made difficult by a variety of factors, e.g., disturbance of the soil...

Application of Model Pile Tests to Axial Pile Design
Experiments conducted with instrumented model pile segment probes at Harvey and Empire, Louisiana are summarized and the observed behavior interpreted. Correlations are developed for the...

Case Study of Offshore Pile System Reliability
This paper presents the results of research effort to evaluate the reliability of offshore pile foundation systems. It is an extension of previous work by the authors [14] dealing with...

Reliability and Resilience � Essential Ingredients of Sustainable Geotechnics
Sustainability of a system is its ability to survive and retain its functionality over time. In very simple terms, sustainability deals with the capacities (resistances) and demands (loads)...

2012 Geo-Wall Competition
Highlights from the Geo-Wall Competition at the 2012 Geo-Congress. Teams from 17 universities competed to construct a model mechanically stabilized earth (MSE) retaining wall out of craft...

Structures Congress 2012
Forging Connections in the Windy City
Proceedings of Structures Congress 2012, held in Chicago, Illinois, March 29-31, 2012. Sponsored by the Structural Engineering Institute of ASCE. Structures Congress 2012 contains 202...

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...

Minimum Design Loads for Buildings and Other Structures
Minimum Design Loads for Buildings and Other Structures provides requirements for general structural design and includes means for determining...

Static Cone to Compute Static Settlement over Sand
(Originally published in J. Soil Mechanics and Foundations Div, 1970,. 96(3), 1011-1043.)...

Conical Test Load Measuring Compressibility
(Originally published in J. of Geotechnical Engineerin, 1993, 119(5) 965-971.)...

Asphalt Parking Lot Runoff Nutrient Characterization for Eight Sites in North Carolina, USA
The objectives of this study were to characterize asphalt parking lot runoff quality and determine factors influencing nutrient concentrations and loads. Event mean concentrations (EMCs)...

Non-Destructive Strength Evaluation of a Continuous, Reinforced Concrete Slab Bridge
In the state of New Mexico, a significant number of reinforced concrete slab (RCS) bridges provide service on interstate highways I-10, I-25, and I-40 that are subjected to large amounts...

Toward a Unified Approach to Anchorage in Reinforced Concrete Design
The introduction of rationalized design procedures for cast-in and post-installed anchors inEurope and the U.S. was intended to provide a uniform factor of safety for anchorages inconcrete,...

An Experimental Study on the Behaviour of Full-Scale Composite Steel Frames under Furnace Loading
In view of recent large fires in tall buildings, such as One Meridian Square (USA), East Tower Central Park (Venezuela), World Trade Center (USA) and Windsor Tower (Spain), there has been...

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...

Port of Los Angeles Risk Management Strategies
This paper examines risk management strategies for the port of Los Angeles. Topics include its importance to the economy, potential port risks, seismic risk strategies, and terrorist risk...

Lessons Learned from the December 26, 2004 Sumatra Quake and Tsunami
On December 26, 2004, a devastating earthquake occurred off the western coast of Sumatra, Indonesia, creating seismic and tsunami waves felt by people who live around the Indian Ocean....

Some Case Histories of Pile Foundations in Permafrost
Foundations for permafrost conditions should conform to one of three basic design principles: keep it frozen, let it thaw, or thaw the ground before construction. To keep the permafrost...

Characterizing the Pathways and Characteristics of Nutrients Discharging from Ground-Water to Surface Water
Any investigation of surface-water quality for a lake or pond requires accurate estimates of the contributing contaminant or nutrient loads. In many cases, inflow from the adjacent ground...

 

 

 

 

Return to search